Table of Contents
Advertisement
4-5. Operating procedure of the sewing pattern
4-5-1. Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately pro-
grammed.
Display
Display
section A
section B
❷
❶
❼ to put the sewing machine in the state where the number of reverse feed stitches can
2) Press
be set. At this time, one of the items shown in the display section B flashes on and off.
Move the item that flashes on and off to the target process (A, B, C or D) you want to set. Then, change
the set value for that process with
The number which exceeds 9 is indicated as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F = 15.
❼
❻
❻ .
– 30 –
[Setting procedure of the reverse feed
stitching]
1) The reverse feed stitching pattern at the
beginning of sewing can be changed
over to "enable / double reverse feed
stitching / disable" by pressing
The reverse feed stitching pattern at
the end of sewing can be changed over
to "enable / double reverse feed stitch-
ing / disable" by pressing
current setting state of the reverse feed
stitching is displayed on the display
section A.
❶ .
❷ . The
Advertisement
Table of Contents
