Table of Contents
Advertisement
5. Performing pattern selection
(1) Selection from the pattern selection screen
1) Set the mode to the input mode.
Under the input mode where SET READY LED
goes out, pattern selection is enabled.
If the current mode is the sewing mode, press
❷
READY key
to the input mode.
2) Call the pattern selection screen.
Pattern No. A which is currently selected is
displayed.
3) Select the pattern.
Press DATA CHANGE key
patterns which have been registered are changed
over in order and displayed. Here, select the No.
you desire to sew.
(2) Selection by means of the register key
For this sewing machine, it is possible to register a desired pattern No. to the PARAMETER REGISTER
key.
When the pattern is registered once, pattern selection can be performed by pressing only the switch.
→ Refer to
"V-16. Using parameter register key"
to change over the mode
❼
, and the
– 26 –
A
❷
p.47.
❼
Advertisement
Table of Contents
