@. SETTING
1. Setting procedure to be taken before first use
To put the production support function into use for the first time, it is necessary to enter a password to
unlock the operation.
Unlock the operation following the steps of procedure described below.
1-1. Entering a password
(1) Displaying the password setting screen
1) Press the Informaton swtch
No. 1.
<Information screen No.1>
2) Then, keep swtch 1 held pressed for three seconds to display the sewing management informa-
ton screen No. 1 (mantaner level).
<Sewing management information screen No. 1 (maintainer level)>
3) Keep Reset swtch 2 held pressed for three seconds to display the password entry popup screen.
<Password entry popup screen>
on the normal sewing screen to display the information screen
i switch 1
– –
Reset switch 2