Setting The Number Of Stitches Of The Parallel Section; Setting The Number Of Stitches Of The Eyelet; Setting The Cut Space; Setting The Eyelet Space - JUKI MEB-3200 Instruction Manual

(4) Setting the number of stitches of the parallel section

(5) Setting the number of stitches of the eyelet

(6) Setting the cut space

(7) Setting the eyelet space

Clearance
Clearance
Clearance
Set the number of stitches from the parallel
section to the bottom section of eyelet.
Set the number of stitches with [RIGHT
or [RIGHT ] key .
1. The number of stitches can be set to
such an extent of 3 to 100 stitches. The
number of stitches that can be set is
limited by the set value of cut length.
Example) When the cut length is equal to
22 mm, the number of stitches is 6 to
41 stitches. In addition, if the number
of stitches is decreased, the number
of revolution of the sewing machine
automatically reduces.
2. For T type, looper thread can be neatly
rolled in at the start of sewing by
increasing the number of stitches.
Set the number of stitches of the top
section of eyelet.
Set the number of stitches with [RIGHT
or [RIGHT ] key .
The number of stitches can be set 4 to 20 stitches.
Set the clearance where the knife drops
in the parallel section.
Set the cut space with [RIGHT
] key .
The space can be set − 1.2 to 1.2 mm in the
increments of 0.1 mm.
Set the clearance where the knife drops
in the eyelet section.
Set the eyelet space with [RIGHT
[RIGHT ] key .
The space can be set − 1.2 to 1.2 mm in the
increments of 0.1 mm.
] key
] key
] key or [RIGHT
] key or
23