Setting Up Connections
IDSL Service
Do the following to configure IDSL frame-based services:
•
Create one or more IDSL line profiles. See
(command-line interface) or
interface).
•
Create one or more IDSL alarm profiles. See
page 130
(command-line interface) or
(Web interface).
•
Configure service for the IDSL frame card ports, including selecting the IDSL card transmit
clock source. See
"Configuring IDSL Service" on page 411
•
Select either ATM VCC or Frame Relay to match the modem. For example, if you are using
a WebRamp 450i modem configured with Ramp1483 service type, configure an ATM
VCC using ramp1483 encapsulation type. If the WebRamp 450i modem is configured for
Frame Relay, you will need to set up Frame Relay service. See
Transmission" on page 26
72
"Configuring IDSL Line Profiles" on page 406
"Configuring IDSL Alarm Profiles" on page 408
"Configuring IDSL Service" on page 133
for information on configuring Frame Relay service.
"Configuring IDSL Line Profiles" on page 127
"Configuring IDSL Alarm Profiles" on
(command-line interface) or
(Web interface).
Avidia System Configuration and Management User Manual
(Web
"Frame Relay