ADC AVIDIA SWD4573I1 User Manual page 347

The following screen illustrates examples of both ds1 interfaces commands.
::interfaces=>ds1 4.3
Port Speed
4.3 1544000
::interfaces=>ds1
Port Speed
4.1 1544000
4.2 1544000
4.3 1544000
4.4 1544000
The following table describes the information displayed after you type a ds1 interface
command.
Column
Port
Speed
Admin Status
Oper Status
LinkUpDown TrapEnable
High Speed
Connector Present
Avidia System Configuration and Management User Manual
Admin Oper
Status Status
up up
Admin Oper
Status Status
up up
up down
up up
up dormant
Description
The slot and port for which the information is displayed.
The current interface bandwidth in bits per second.
The configured state of the interface. Options:
—
• Up The interface is activated.
—
• Down The interface is deactivated.
The current operational state of the interface. Options:
• Up — The interface is operational and ready to receive packets.
• Down — The interface is not operational.
Indicates whether trap generation is enabled or disabled.
The current speed, in Mbps. This value is rounded to the nearest of
the following values:
• 2
• 6
• 8
Whether the physical connector is present or not. True indicates the
connector is present. False indicates the connector is absent.
Chapter 15: Monitoring Physical Interfaces
LinkUpDown High Connector
TrapEnable Speed Present
enabled 2 true
LinkUpDown High Connector
TrapEnable Speed Present
enabled 2 true
enabled 2 true
enabled 2 true
enabled 2 true
321