Table of Contents
Advertisement
The first row of the
the management card to the ATM network. The VPI and VCI for this session are assigned
internally. Click
displays the beginning of the table.
Configuration Table
Information
Admin Status
Oper Status
Slot
Card Type
VPI
VCI
Service Type
Bridge Port
Route IP Address
Subscriber
Encap
Avidia System Configuration and Management User Manual
Session Configuration Table
and
if necessary to view the entire
displays the next page of the table. The
window displays the following information:
Description
The configured admin status of the session.
• Up indicates the session is enabled.
• Down indicates the session is disabled.
The current operational status of the selected port.
• Up indicates the port is operational and passing data.
• Down indicates the port is not operational.
The slot and port of the line or channel card that is used for the
session.
The type of line or channel card used for the session.
The line or channel card VPI used for the session.
The line or channel card VCI used for the session.
The type of service configured for the session, either Bridging,
Routing, Brouting (bridging and routing) or n/a, which indicates that
no service is configured.
The index number assigned to the logical bridging port used for the
session. This number is automatically assigned by the system. If
bridging is not enabled, this value is n/a.
The IP address of the management card logical port or WAN address
used for this session (routing sessions only). If routing is not enabled,
this value is n/a.
The subscriber name assigned to identify the session.
The configured encapsulation mode, either LLC_SNAP,
VC_MUX_Bridged or VC_MUX_Routed.
Chapter 24: Configuring Bridging and Routing
displays information for a session that connects
Session Configuration Table
.
Session
487
Advertisement
Table of Contents
