ADC AVIDIA SWD4573I1 User Manual page 563

Information
Admin Status
Operation Status
In Octet Count
In Unicast Pkt Count
In Discard Count
In Error Pkt Count
In Unknown Pkt Count
Out Octet Count
Out Unicast Pkt Count
Out Discard Count
Out Error Pkt Count
Link Up/Down
High Speed
Connect
Avidia System Configuration and Management User Manual
Description
The configured state of the interface. Options:
• Up — The interface is activated.
—
• Down The interface is deactivated.
The current operational state of the interface. Options:
• Up — The interface is operational and ready to receive packets.
• Down — The interface is not operational.
The total number of octets received on the interface, including
framing characters.
The number of subnetwork-unicast packets delivered to a
higher-layer protocol.
The number of inbound packets that were chosen to be discarded
to prevent them from being delivered to a higher-layer protocol,
even though no errors had been detected.
The number of inbound packets that contained errors preventing
them from being delivered to a higher-layer protocol.
The number of packets received via the interface that were
discarded because of an unknown or unsupported protocol.
The number of octets transmitted out of the interface, including
framing characters.
The total number of packets that higher-level protocols requested
be transmitted to a subnetwork-unicast address, including those
that were discarded or not sent.
The number of outbound packets that were chosen to be
discarded to prevent them from being transmitted to a
higher-layer protocol, even though no errors had been detected.
The number of outbound packets the could not be transmitted
because of errors.
Indicates whether trap generation is enabled or disabled.
The current speed, in Mbps. This value is rounded off to the
nearest of the following values:
• 2
• 6
• 8
Whether the physical connector is present or not. True indicates
the connector is present. False indicates the connector is absent.
Chapter 27: Monitoring Physical Interfaces
537