ADC AVIDIA SWD4573I1 User Manual page 66

Bridging and Routing
You can set up ATM PVCs between cards in the Avidia system and to modems and run sessions
over them. The maximum number of ATM PVCs that you can terminate on the AMC for
bridging, routing, or brouting sessions is 96. See the table on
of ATM PVCs that you can terminate on other Avidia cards. The following table summarizes
the service types and encapsulation that you can use for the various connections within the
Avidia system. These connections may ultimately terminate on modems or other devices
attached to an Avidia system.
Connection between:
OC3 line card and an SDSL frame channel
card
OC3 line card and the AMC
ADSL channel card and the AMC
SDSL frame channel card and the AMC
40
:
Service Type
LAN tunneling
Bridging, routing, brouting
Bridging, routing, brouting
Bridging only
Avidia System Configuration and Management User Manual
page 24 for the maximum number
Encapsulation
VC-MUX _Bridging
• LLC/SNAP (router or brouter)
• VC-MUX_Bridging (bridging)
• VC-MUX_Routing (routing)
• LLC/SNAP (router or brouter)
• VC-MUX_Bridging (bridging)
• VC-MUX_Routing (routing)
VC-MUX_Bridging only