Table of Contents
Advertisement
Configuring Bridging and Routing Sessions
10
If you selected
a
In the
RIP Send
packets,
RIP 1), or
The RIP type is determined by the RIP version used by the other routers in the network.
b
In the
RIP Receive
RIP 1 or RIP2
c
Click
Browse
d
Click
want to assign to this session (see
information on Router Groups). The
IP address and subnet masks are assigned to the session.
11
Do one of the following:
•
To activate the settings and close the
confirmation dialog click
•
To cancel the settings and close the
490
Routing
in
Step
8, do the following:
box, select the desired type of RIP packets to be sent (
RIP Version1
,
RIP 1 Compatible
RIP Version2
).
box, select the desired type of RIP packets to be received (
, or
Do Not Receive
to display the
Router Group Table
to select the router group that contains the IP address and subnet mask you
Back
.
(RIP2-type packets that are compatible with
RIP packets).
window.
"Configuring Router Groups" on page 493
Router Group Table
Add Session Entry
Add Session Entry
Avidia System Configuration and Management User Manual
Do Not Send
RIP1
window closes and the selected
window, click
Set
, then in the
window, click
Cancel
.
RIP
,
RIP2
,
for
Advertisement
Table of Contents
