Table of Contents
Advertisement
Configuring Bridging and Routing Sessions
The first row of the Session Configuration Table displays information for a session that connects
the management card to the ATM network. The VPI and VCI for this session are assigned
internally.
Information
Idx
St
Pt
Vpi
Vci
Sub
Admin
Oper
Ser
IpAddr
Encap
Pri
STP Cost
234
Description
The Session Configuration Table row index number.
The slot and port on which the session is configured.
The session VPI and VCI. For SDSL sessions, the VPI and VCI value is
n/a.
A name assigned to identify the session.
The administrative status of the session. Up indicates the session is
enabled. Down indicates the session is disabled.
The operational status of the session. Up indicates the session is
operational and passing data. Down indicates the session is not
operational.
The type of service configured for the session. Options:
• B—bridging
• R—routing
• BR—both bridging and routing
• N/A—no service
The IP address of the management card logical port or WAN address
used for the session (routing sessions only).
The configured encapsulation mode. Options:
• LLC—LLC-SNAP
• VcB—Vc Mux Bridged
• VcR—Vc Mux Routed
The Spanning Tree Protocol priority of the session. The range is from 0
to 255, with 0 being the highest priority. The default is 128.
The Spanning Tree Protocol path cost of the session. The valid range is
1 to 65535, with 1 being the lowest cost. The default value is 250 for WAN
ports and 100 for LAN ports.
Avidia System Configuration and Management User Manual
Advertisement
Table of Contents
