ADC AVIDIA SWD4573I1 User Manual page 549

The Path Current Performance
Information
Slot
Card Description
Port
Width
Status
Errored Seconds
Severely Errored Seconds
Coding Violations
Unavailable Seconds
Far End Errored Seconds
Far End Severely Errored
Seconds
Far End Coding Violations
Far End Unavailable Seconds
Avidia System Configuration and Management User Manual
window provides the following information:
Description
The slot number and description of the line card for which the
Path current performance is displayed.
The port number for which the Path current performance is
displayed.
The designated optical bandwidth.
The status of the interface. Options:
• sonetPathNoDefect
• sonetPathSTSLOP
interface.
• sonetPathSTSAIS (Alarm Indication Signal)
alarm at the local end of the SONET line.
• sonetPathSTSRDI (Remote Defect Indication)
alarm at the remote end of the SONET line.
• sonetPathUnequipped—The Path layer is not configured
properly at the remote end.
• sonetPathSignalLabelMismatch—The Path layer is not
properly provisioned.
The number of seconds during which at least one Path layer
bipolar error was detected or an Alarm Indication Signal - Path
(AIS-P) error was present.
The number of seconds during which 2,500 or more Path layer
bipolar errors were detected or an AIS-P or Loss of Pointer -
Path (LOP-P) error was present.
The number of bipolar errors detected at the Path layer.
The number of seconds during which the Path was unavailable.
A Path becomes unavailable after ten consecutive severely
errored seconds.
The count of seconds during which at least one Path layer
bipolar error was reported by the far-end or a one-bit RDI-P
(Remote Defect Indicator - Path) error was present.
The number of seconds during which 2,500 or more Path
bipolar errors were reported by the far-end or a one-bit RDI-P
error was present.
The number of bipolar errors reported by the far-end and
reported back to the near-end using the RDI-P indication.
The number of seconds during which the Path was unavailable
at the far end.
Chapter 26: Monitoring Network Connections
—
There are no errors on the Path layer.
— There is a Loss of Pointer error on the
— There is an
— There is an
523