Table of Contents
Advertisement
To modify RIP information:
1
In the
RIP Configuration Table
The
Modify RIP Configuration
2
To modify the Send mode in the
1
,
RIP1 Compatible
3
To modify the Receive mode, in the
1 or RIP 2
,
Do Not Receive
4
To modify the hop count, in the
allowed to cross before arriving at their destination.
5
To modify the authentication type, in the
(
No Authentication
Password
if you are using a
The authentication type determines whether a password is required for the router to learn
information from the session ports in the same network segment.
6
If you selected
Avidia System Configuration and Management User Manual
window, click
window opens.
Send
,
RIP Version 2
).
Receive
).
Hop Count
or
Simple Password
). You can only set the authentication type to
Send
or
Receive
No Authentication
in
Step
Chapter 24: Configuring Bridging and Routing
.
box select the desired setting (
box select the desire setting (
box type the number of hops the packets are
Authentication Type
mode that supports RIP 2.
5, go to
Step
8.
Do Not Send
,
RIP Version
RIP 1
,
RIP 2
box, select the desired setting
,
RIP
Simple
499
Advertisement
Table of Contents
