Table of Contents
Advertisement
Configuring ADSL Alarm Profiles
3
In the
Upstream
this threshold, or type 0 to disable the trap.
The errored seconds threshold determines the acceptable number of seconds during which
errors occur on the ADSL interface that prevent the payload from being corrected. In a
normal environment with sufficient margin, a typical errored seconds threshold value is 10.
4
Click
Add
to add the ADSL alarm profile.
Deleting ADSL Alarm Profiles
You cannot delete profiles that are assigned to ports.
1
In the
ADSL Alarm Profile Table
configuration profile you want to delete.
Click
and
table.
displays the next page of the table.
2
Select the
Delete
select the
Delete
deleted), click
If you decide not to delete a selected row, clear the
Clear All
to clear the
3
Click
Delete Checked Row(s)
A confirmation dialog displays.
4
Click
OK
to delete the selected table rows, otherwise click
390
and
Downstream 15 Minutes Threshold Errored Seconds
window, locate the table row that contains the ADSL alarm
if necessary to view the entire table.
check box next to the row that contains the profile you want to delete. To
check box for all rows (except the default profile, which cannot be
Check All
.
Delete
check box for all rows.
to delete the profiles.
displays the beginning of the
Delete
check box next to the row. Click
Cancel
Avidia System Configuration and Management User Manual
boxes, type a value for
.
Advertisement
Table of Contents
