Table of Contents
Advertisement
Monitoring STP Port Status
Information
Bridge Port
Priority
Port State
Path Cost
Designated Root
Designated Cost
Designated Bridge
Designated Port
Forward Transitions
308
Description
The logical bridge session port number. The system automatically assigns
this number when you configure a bridging session.
The configured Spanning Tree Protocol priority for the session port.
The current Spanning Tree Protocol state of the session port, either
Forwarding, Blocked, or Learning.
The configured Spanning Tree Protocol path cost for the session port. The
Path Cost indicates the efficiency of the session.
An eight-byte octet that displays the port priority in hexidecimal (first two
bytes) followed by the MAC address of the bridge that is designated as the
root, or base, of the Spanning Tree topology.
The cost of the path from the bridge port to the designated root. The range
is from 1 to 65535, with 1 indicating the lowest cost.
An eight-byte octet that displays the port priority in hexidecimal (first two
bytes) followed by the MAC address of the bridge that is chosen by the STP
to forward traffic to the root.
The bridge port that is chosen by the STP to forward traffic to the root.
The number of times the bridge port state has changed from Learning to
Forwarding. The STP changes the bridge state in response to learned
topology changes.
Avidia System Configuration and Management User Manual
Advertisement
Table of Contents
