The following table describes the alarm information that displays when you type the log alarm
command.
Information
Timestamp
Type
Slot
Description
When you type log all, a screen similar to the following displays.
::admin=>log all
Timestamp
THU, DEC 23 1999 06:50:40
THU, DEC 23 1999 06:50:40
THU, DEC 23 1999 06:50:40
Avidia System Configuration and Management User Manual
Description
The time and date the alarm occurred.
The type of event. Options:
• alarm
—
An alarm has occurred or been cleared.
• trap
—
A trap has been sent.
• bintrace
—
A binary trace has been sent. This
information is for technician use only.
• txttrace
—
Additional details regarding about the
sent traps. This information is for technician use
only.
The slot number associated with the alarm.
Reports the alarm severity, Alarm ID and description
as obtained from the alarm description database.
Type
Slot
Description
txttrace
InitIbc: OK
trace
4
Trap: chassis config change
alarm
6
No Alarm, Alarm #104: chassis
line card down
Chapter 16: Monitoring System Alarms and Status
329