Table of Contents
Advertisement
Configuring PVPC Policing
1
From the ::port=> prompt type show to display the PVPC Table.
2
Note the index number of the PVPC Table entry for which you want to configure policing.
3
From the ::vpl=> prompt type the modify command as follows, then press
modify <index> <enable|disable>
Parameters
<index>
The index number of the PVPC Table entry you want to configure.
<enable|disable>
The administrative status of policing on the selected PVPC.
Example
::vpl=> modify 4 enable
Displaying the PVPC Policing Table
To verify the policing configuration for each PVPC, from the ::vpl=> prompt, type show
then press
ENTER
::vpl=> show
Index
Port
1
1.1
2
2.1
Avidia System Configuration and Management User Manual
. A screen similar to the following displays.
UPC
VPI
Status
0
enable
0
disable
Chapter 8: Configuring ATM Virtual Circuits
ENTER
.
203
Advertisement
Table of Contents
