Table of Contents
Advertisement
Configuring PVCCs
Parameter
<index>
The PVCC Table row index number of the primary PVCC for which you want to switch
traffic from the backup PVCC back to the primary PVCC.
Example
::pvcc=> restore 3
Changing Cell Channel Card PVCC Admin Status
1
From the ::pvcc=> prompt, type show then press
parameters for all PVCCs.
2
Note the index number of the PVCC for which you want to change the status.
3
Type the admin command in the following format then press
admin <index> (up|down)
Parameters
<index>
The index number of the PVCC you want to activate or deactivate.
(up|down)
Type up to activate the PVCC. Type down to deactivate the PVCC.
Example
::pvcc=> admin 2 up
174
ENTER
to display the configured
ENTER
Avidia System Configuration and Management User Manual
.
Advertisement
Table of Contents
