Table of Contents
Advertisement
Configuring PVCCs
The following table describes the information displayed after you type a show pvc command.
Column
Index
Admin
Oper
Source Port
VPI
VCI
Destination Port
VPI
VCI
Source TxTraffic Index
Source RxTraffic Index
178
Description
The PVCC table index number of the displayed
PVCC.
The configured status of the PVCC, either up
(activated) or down (deactivated).
The current operational status of the PVCC, either
up (PVCC is passing data) or down (PVCC is not
passing data).
The PVCC source port number. This is the
lower-numbered of the two PVCC ports. If you
assigned the higher-numbered port to the
parameter during PVCC configuration,
port>
the system automatically reassigns the
higher-numbered port to the
parameter.
The source port VPI.
The source port VCI.
The PVCC destination port number. This is the
higher-numbered of the two PVCC ports. If you
assigned the lower-numbered port to the
parameter during PVCC
<dest port>
configuration, the system automatically
reassigns the lower-numbered port to the
parameter.
port>
The destination port VPI.
The destination port VCI.
The ATM traffic profile assigned to data
transmitted from the source port. The transmit
traffic profile assigned to the PVCC source port
are adjusted to reflect the same service on the
destination port.
The ATM traffic profile assigned to data received
on the source port. The receive traffic profile
assigned to the PVCC source port are adjusted to
reflect the same service on the destination port.
Avidia System Configuration and Management User Manual
<src
<dest port>
<src
Advertisement
Table of Contents
