Verify Software Update Installation; Verify Media Server Configuration; On Second S8710 Media Server; This Media Server Becomes Media Server 2 - Avaya S8500 Manual

3 Migrating from an S8700 Media Server to an S8710 Media Server

On second S8710 Media Server

Verify software update installation

1
Under Server, click Software Version.
2
Verify that the new software update is listed.

Verify media server configuration

1
Under Server Configuration, click Configure Server to start the configure server process to open
the first page of the Configure Server process.
2
Click Continue through the Review Notices to get to the Specify how you want to use this wizard
page.
3
Select Configure all services using the wizard.
4
Click Continue through all the screens, checking for new screens and new fields on existing
screens as mentioned in the Software Release Letter.
5
When you complete all the new fields, if necessary, click Continue on the Update System screen.
The Update System screen displays each configuration task as it completes. When done, the
screen displays the line
6
Click Close Window to close the Configure Server wizard.
7
Disconnect from the media server.

On second S8710 Media Server

158
NOTE:
You must click through all the screens whether there are changes or not.
NOTE:
You may need to reset the port speeds for the Ethernet interfaces.
NOTE:
You do not need to fill in the static routes for Release 2.0 or later.
All configuration information was entered
NOTE:

This media server becomes media server 2.

CAUTION:

The duplication cables must not be connected. If connected, disconnect.

Migrating to the Avaya S8700 or S8710 Media Server
.
June 2004