Chapter 4: Media Server Configuration; Opening The Maintenance Web Interface - Avaya S8500 Installing And Configuring

Chapter 4: Media server configuration

After you install the Communication Manager software, you must use the Avaya Installation
Wizard to configure the media server.
This section covers the following tasks:

Opening the Maintenance Web Interface

●
Copying files to the media server
●
Enabling network time servers
●
Using the Avaya Installation Wizard
●
Verifying the media server connection to the customer LAN (if provided)
●
Configuring the modem
●
Checking LED activity on the dual NIC
●
Note:
Ensure that you have the completed Electronic Preinstallation Worksheet (EPW)
Note:
before you start this process.
Note:
Ensure that your networking and Web browser settings are correct. For more
Note:
information, see
Opening the Maintenance Web Interface
You can use the Maintenance Web Interface to copy files from your Services laptop computer to
the media server and perform other configuration tasks.
1. Open a Web browser.
2. In the Address field, type 192.11.13.6 and press Enter to display the login page.
Note:
The first time that you log in, you see a message that asks you to install a security
Note:
certificate. Follow the instructions for your particular browser to accept the
certificate. You can also install the certificate on your computer with the
instructions in the online Help for your browser.
3. Log in as craft and use the initial craft password.
4. When you see a message that asks Do you want to suppress alarms?, select Yes.
5. Click Launch Maintenance Web Interface.
Installing and Configuring the Avaya S8500 Media Server
on page 47
on page 48
on page 48
on page 49
on page 52
on page 54
Configuring the network for Windows 2000 and XP
Opening the Maintenance Web Interface
on page 51
on page 106.
47
June 2006