Record The Product Id; Access The Standby S8700 Media Server; Shut Down The Standby S8700 Media Server; On First S8710 Media Server - Avaya S8500 Manual

Record the Product ID

1
Click Start > Run to open the Run dialog box.
2
Type
telnet 192.11.13.6
3
Log in as craft or dadmin.
4
At the prompt, type
Record the product ID for future use.

Access the standby S8700 Media Server

1
Clear the ARP cache on the laptop, if necessary. See
143 and return here.
2
Disconnect the laptop from media server 1 and connect it to the services port (2) on media
server 2
3
Log in. See
4
Repeat Back up the system files
server 2.

Shut down the standby S8700 Media Server

CAUTION:
Make sure you are connected to the standby media server.
1
Under Server, click Shutdown Server, then Shutdown then
•
deselect Restart Server after Shutdown.
•
select Delayed shutdown
•
select Shut down even if this is the active server.
2
Click Shutdown.
3
Disconnect the laptop from the services port.
4
Disconnect the power cord from the UPS.

On first S8710 Media Server

NOTE:

This media server becomes media server 1.

CAUTION:

The duplication cables must not be connected. If connected, disconnect.

Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Migrating from an S8700 Media Server to an S8710 Media Server
and press Enter.
and press Enter.
productid
Access the media server on page 145 and return here.
on page 147 and
On first S8710 Media Server
Clear the ARP cache on the laptop
Back up the security files on page 148 for media
3
on page
149