Overview; Removal; Disposal - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

18
18.1

Overview

This chapter contains information and environmental protection specifications that
must be observed for correct disassembly and disposal of the device.
18.2

Removal

Depending on the connected peripherals, the removal may need to be performed
by an electrical specialist.
In addition, the same safety precautions that apply to the mounting and installation
of the respective components must be taken.
Removing the product
To remove the product, follow the installation and mounting steps in the reverse
order.
Further information:
Further information:
18.3

Disposal

If you have any questions about the disposal of the product, please contact a
HEIDENHAIN service agency
300
Removal of the product must be performed only by qualified personnel.
Further information: "Personnel qualification", Page 29
"Installation", Page 45
"Mounting", Page 39
Incorrect disposal of the product!
Incorrect disposal of the product can cause environmental
damage.
Do not dispose of electrical waste and electronic components
in domestic waste
The integrated backup battery must be disposed of separately
from the product
Forward the product and the backup battery to recycling in
accordance with the applicable local disposal regulations
NOTICE
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Removal and disposal | Overview