Using The Program; Figure 51: Example Of A Program In The Program Un Operating Mode - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Program run | Using the program
12.2

Using the program

The product displays a loaded program with the blocks and, when applicable, with
the individual working steps of the blocks.
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information:
Requirement:
The appropriate workpiece and tool have been clamped
A program *.i file type has been loaded
Further information:

Figure 51: Example of a program in the Program un operating mode

1 View bar
Simulation window (optional)
2
Distance-to-go display
3
4 Toolbar
5 Program blocks
6 Spindle speed (machine tool)
7 Program management
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Manufacturer's documentation for the machine
"Managing programs", Page 204
1 2 3
7 6
4
5
199
12