2
2.1
Overview
This chapter is intended to help you quickly learn to handle the
most important procedures on the control. For more information on
the respective topic, see the section referred to in the text.
The following topics are included in this chapter:
Switching on the machine
Graphically testing the workpiece
Setting up tools
Workpiece setup
Machining the workpiece
The User's Manuals for Conversational Programming
and ISO Programming cover the following topics:
Switching on the machine
Programming the workpiece
42
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
First steps | Overview