HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 31

Safety | General safety precautions
2.7.2 Electrical safety precautions
Hazard of contact with live parts when opening the unit.
This may result in electric shock, burns or death.
Never open the housing
Only the manufacturer is permitted to access the inside of the product
Hazard of dangerous amount of electricity passing through the human
body upon direct or indirect contact with live electrical parts.
This may result in electric shock, burns or death.
Work on the electrical system and live electrical components is to be
performed only by trained specialists
For power connection and all interface connections, use only cables and
connectors that comply with applicable standards
Have the manufacturer exchange defective electrical components
immediately
Regularly inspect all connected cables and all connections on the product.
Defects, such as loose connections or scorched cables, must be removed
immediately
Damage to internal parts of the product!
If you open the product, the warranty and the guarantee will become void.
Never open the housing
Only the product manufacturer is permitted to access the inside of the
product
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
WARNING
WARNING
NOTICE
2
31