Setup | Single steps for setup
Configuring the network drive
You will need the following data for configuring the network drive:
Name
Server IP address or host name
Shared folder
User name
Password
Network drive options
Contact your network administrator for the correct network settings for
configuring the product.
Requirement:
available.
Further information:
Further information:
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
The product is connected to a network and a network drive is
"Connecting a network peripheral", Page 55
Tap Settings in the main menu
Tap Interfaces
Tap Network drive
Enter the network drive details
Confirm the entries with RET
Use the ON/OFF slider to activate or deactivate the Show
password function
If required, select Network drive options
Select Authentication for encrypting the password in the
network
Configure the Mount options
Tap OK
Tap Mount
The connection to the network drive is established
"Network drive", Page 237
8
141