Defining The Fit; Reaming The Fit - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Quick Start | Machining a fit (MDI mode of operation)
9.7.1

Defining the fit

9.7.2

Reaming the fit

HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Tap Tools on the status bar
The Tools dialog box appears
Tap Reamer
Tap Confirm
The associated tool parameters are applied automatically
The Tools dialog box is closed
Tap Create on the status bar
A new block is displayed
In the Block type drop-down list, select the Hole block type
Enter the following parameters according to the dimensional
data:
X coordinate: 95
Y coordinate: 50
Z coordinate: drill through
If the tool axis is NC-controlled, enter the following
parameters:
Z coordinate: –25
Confirm each entry with RET
To run the block, tap END
The positioning aid is displayed
If the simulation window is active, the position and traverse
path are visualized
On the machine tool, insert the Ø 20 mm H6 reamer into the
spindle
If the product or the machine tool has NC-controlled axes, tap
or press the NC START key
On the product, set a spindle speed of 250 rpm
Start the machining process—follow the instructions of the
wizard
Tap Close
Program run is terminated
The wizard closes
You have successfully machined the fit
9
161