Connecting Input Devices; Connecting A Network Peripheral - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Installation | Wiring switching inputs and outputs
Pin layout of X106
1
Aout 0+ Aout 1+ Aout 2+ Aout 3+
9 10
Aout 0– Aout 1– Aout 2– Aout 3–
Analog inputs:
5.7

Connecting input devices

Comply with the pin layout
Remove and save the dust protection cap
Route the cables based on the mounting variant
Further information:
Connect USB mouse or USB keyboard to USB Type-A port (X31, X32, X33,
X34). Make sure the USB cable connector is fully inserted
Further information:
Pin layout of X31, X32, X33, X34
4 3 2 1
1
DC 5 V
5.8

Connecting a network peripheral

Comply with the pin layout
Remove and save the dust protection cap
Route the cables depending on the mounting variant
Further information:
Connect the network peripheral to Ethernet port X116 using a standard CAT.5
cable. The cable connector must firmly engage in the port
Further information:
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
2 3 4
11 12
"Assembly of the product", Page 40
"Device overview", Page 47
2
Data (–)
"Assembly of the product", Page 40
"Device overview", Page 47
5 6 7
GND GND Ain 1
13 14 15
DC 5 V Ain 0 Ain 2
Analog outputs:
3
Data (+)
8
Ain 3
4
GND
5
55