HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 253

Settings | Axes
Parameter
Mechanical ratio
Reference point displacement
Settings for encoders with interfaces of the type 1 V
Parameter
Encoder input
Incremental signal
Encoder model
Signal period
Line count
Teach sequence
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Explanation
For display of a rotary axis as a linear axis:
traverse path in mm per revolution
Setting range: 0.1 mm ... 1000 mm
Default value: 1.0
Configuration of the offset between the reference mark and the
zero point
"Reference point displacement",
Further information:
Page 256
or 11 μA
PP
Explanation
Assignment of the encoder input to the axis of the product
Settings:
Not connected
X1
X2
X3
X4
X5
X6
Further information: "Device overview", Page 47
Signal of the connected encoder
Settings:
1 Vpp: Sinusoidal voltage signal
11 µApp: Sinusoidal current signal
Default value: 1 Vpp
Connected encoder model
Settings:
Linear encoder: Linear axis
Angle encoder: Rotary axis
Angle encoder as linear encoder: Rotary axis is displayed as
linear axis
Default value: Depending on the connected encoder
For linear encoders
Length of a signal period
Setting range: 0.001 µm ... 1000000.000 µm
Default value: 20.000
For angle encoders and for display of a rotary axis as a linear
axis.
Number of lines
Setting range: 1 ... 1000000
Default value: 1000
Starts the teach sequence for determining the Line count for an
angle encoder based on a specified angle of rotation.
PP
15
253