Stopwatch - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

6
Setting units
Activating Scaling factor
While an MDI block or a program block is executing, the position stored in the
block is multiplied by the Scaling factor. This allows you to mirror or scale an MDI
block or program block on one or more axes, without changing the block.
6.10.3

Stopwatch

The status bar provides a stopwatch for measuring the machining times, etc.
The stopwatch uses the time display format h:mm:ss and operates on the same
principle as a standard stopwatch, i.e. it measures elapsed time.
Operating element
82
Tap the quick access menu on the status bar
Select the desired Unit for linear values
Select the desired Unit for angular values
Tap Close to close the quick access menu
The selected units are displayed in the quick access menu
Tap the quick access menu on the status bar
To navigate to the desired setting, drag the view to the left
Activate Scaling factor with the ON/OFF slide switch
Enter the desired Scaling factor for each axis
Confirm each entry with RET
To close the quick access menu, tap Close
For an active scaling factor ≠ 1, the corresponding symbol
appears in the position display
Function
Start
Starts time measurement or resumes time measure-
ment after Pause
Pause
Interrupts time measurement
Stop
Stops time measurement and resets it to 0:00:00
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Basic operation | Status bar