HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 21

Fundamentals | Documentation on the product
1.4.3 Storage and distribution of the documentation
The instructions must be kept in the immediate vicinity of the workplace and must
be available to all personnel at all times. The operating company must inform the
personnel where these instructions are kept. If the instructions have become
illegible, the operating company must obtain a new copy from the manufacturer.
If the product is given or resold to any other party, the following documents must
be passed on to the new owner:
Addendum (if supplied)
Installation Instructions
Operating Instructions
1.5 About these instructions
These instructions provide all the information and safety precautions needed for
the safe operation of the device.
1.5.1 Document category
Operating Instructions
These instructions are the
The Operating Instructions
Are oriented to the product life cycle
Contain all information and safety precautions needed for the proper operation
of the product according to its intended use
1.5.2 Target groups for the instructions
These instructions must be read and observed by every person who performs any
of the following tasks:
Mounting
Installation
Commissioning and configuration
Operation
Programming
Service, cleaning and maintenance
Troubleshooting
Removal and disposal
HEIDENHAIN | POSITIP 8000 | Operating Instructions Milling | 03/2020
Operating Instructions for the product.
1
21