Setting Locations (If Necessary) - Avaya S8400 Installing & Configuring

Setting locations (if necessary)

After you set the rules for daylight savings time, you must set the locations for all port networks.
Port networks can be in different time zones. Use SAT commands to set the locations for the
port networks.
1. Type change locations and press Enter.
change locations
Number
1
2
3
4
5
6
7
8
9
10
11
2. In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.
3. Type the information in the various fields for each media gateway.
In the Name field for location 1, type Main.
4. Click Submit to save the changes.
Note:
The location of a port network is defined on the SAT cabinet form (change
Note:
cabinet X). The location of a network region is defined on the SAT
ip-network-region form (change ip-network-region X). The Location field
in the ip-network-region form is part of the association to the
daylight-savings-rule by which a IP phone behaves.
Installing and Configuring the Avaya S8400 Server
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Name Timezone
Offset
Main + 00:00
CA - 02:00
LOCATIONS
Daylight-Savings
Rule
0
0
:
:
:
:
:
:
:
:
:
Setting locations (if necessary)
Page 1 of
Number Plan
Area Code
January 2008
5
53