Chapter 7: Post-installation administration
This section covers the following tasks:
Verifying translations
●
Setting daylight savings time rules
●
Setting locations (if necessary)
●
Verifying date and time
●
Clearing and resolving alarms
●
Backing up files to the compact flash media
●
Enabling alarms to INADS via modem
●
Enabling alarms to INADS via SNMP
●
Before leaving the site
●
Verifying translations
1. Open a SAT session on the media server.
2. Type list configuration all and press Enter to view all the administered circuit
packs in the system.
3. IPSI Refer to your planning documents and check the administration status on the
following items:
list station
●
●
list trunk-group
●
list hunt-group
Installing and Configuring the Avaya S8400 Media Server
on page 57
on page 58
on page 59
on page 60
on page 60
on page 61
on page 62
on page 62
on page 61
57
February 2006