MFP Fax Board
MFP PL8.1.5 (PWBA Fax)
Phaser 6500/WorkCentre 6505 Service Manual
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the Left Side Cover (page 8-18).
4. Remove the Outer Pole Cover (page 8-39).
5. Remove the Rear Cover (page 8-20).
6. Remove the IP Board Shield (page 8-142).
7. Remove two screws (silver, 6mm) that secure the board to the chassis.
8. Release the board from the connector on the Image Processor Board.
Xerox Internal Use Only
Service Parts Disassembly
s6500-331
8-143