Ldap Directory Setup (Internal Address Book) - Xerox WorkCentre M20i System Administration Manual

LDAP Directory Setup (Internal Address Book)

This section describes how to configure the Lightweight Directory Application Protocol.
All configurations for LDAP can be setup using CentreWare Internet Services the only setting
that can be made at the machine is Primary LDAP IP Address - see page 9-19.
Refer to "Email Setup using Internet Services" on page 9-20.
NOTE: Configuration of the LDAP directory settings requires the network to support
LDAP services.
The WorkCentre M20i will display search results for the Internal Address Book as defined by
the LDAP configuration. For example, an LDAP server can return a search query "And" as
"Andrew Smith" when the result "Andrews, James" may have been expected.
NOTE: Search strings for common names are limited to accented characters
(ISO8859-1 characters) only.
The <lastname, firstname> or,<firstname, lastname> display behavior is controlled by the
LDAP server and not the WorkCentre M20i.
NOTE: The LDAP configuration may also return other search results, for example
"AndrewS" for the same search query.
Page 9-18 Xerox WorkCentre M20i System Administration Guide