Ctd (Adc) Sensor Dustiness Warning / Iot Ctd (Adc) Sensor Dustiness - Xerox Phaser 6500 Service Manual

Error Messages and Codes

CTD (ADC) Sensor Dustiness Warning / IOT CTD (ADC) Sensor Dustiness

Applicable Error Codes
3-148
• 092-410 / 092-910
Troubleshooting Reference Table
Applicable Parts
Left Side Harness Assy (PL3.1.18)
■
Transfer Belt (PL6.1.7)
■
MCU Board (SFP PL8.2.13; MFP
■
PL8.3.6)
Troubleshooting Procedure
Step Actions and Questions
1 Turn OFF the power, and gently wipe
the ADC Sensor window with a clean
dry cloth or cotton swab.
After wiping the window, close the
Front Cover.
Does the error still occur when the
power is turned Off and On?
ADC Sensor window
2 Check the connectors between the
MCU Board and ADC Sensor.
Are P/J28 and P/J281connected
correctly?
3 Does the error still occur when the
power is turned Off and On?
Xerox Internal Use Only
http://www.manuals4you.com
Wiring and Plug/Jack Map References
"Map 4 - SFP MCU Board" on
■
page 10-9
"Map 9 - MFP MCU Board and HVPS"
■
on page 10-18
"SFP Xerographics" on page 10-30
■
"SFP Toner Dispenser" on page 10-32
■
"MFP Xerographics" on page 10-43
■
"MFP Toner Dispenser" on page 10-45
■
■
Yes
Go to step 2.
s6500-500
Go to step 4.
Go to step 4.
Phaser 6500/WorkCentre 6505 Service Manual
No
Complete.
Reconnect
P/J28 and/or
P/J281
correctly, then
go to step 3.
Complete.