Print-Quality Troubleshooting
Spots from ADF
Initial Actions
5-42
There are spots on copies from the ADF.
•
Check the document glass.
•
Ensure there are no debris on the document glass.
Troubleshooting Reference Table
Applicable Parts
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure
Step
Actions and Questions
1
1. Check the original document.
2. Are there spots on the original
document?
2
1. Check for any debris on the
document glass and the CVT
window.
2. Are there any debris?
3
Does the image quality improve?
Xerox Internal Use Only
http://www.manuals4you.com
Example Print
Yes
Replace the
original
document.
Remove the
debris and
clean the
document glass
using a lint-free
cloth.
Complete.
Phaser 6500/WorkCentre 6505 Service Manual
Spots on Glass
No
Go to step 2.
Go to step 3.
Replace the IIT
Sub-Assembly
(page 8-195).