MFP Left Side Cover
MFP PL 1.1.13 (Cover Assy Side L)
Phaser 6500/WorkCentre 6505 Service Manual
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Loosen the knurled screw that secures the IP Board Cover. Gently pull the
cover back and swing the cover open.
4. Remove the two screws (silver, M4, 6mm) and the three screws (silver, tap,
8mm) that secure the Left Side Cover.
5. Release the 3 hooks (one on the front, two at the bottom), then shift the Left
Side Cover toward the front to remove it from the printer.
Xerox Internal Use Only
Service Parts Disassembly
Hooks
s6500-215
s6500-216
8-37