Sfp Upper Frame Assembly - Xerox Phaser 6500 Service Manual

Color laser printer/multi-function printer

Hide thumbs Also See for Phaser 6500:

Table of Contents

SFP Upper Frame Assembly

Phaser 6500/WorkCentre 6505 Service Manual

While this procedure is not directly related to a specific part, upper frame removal

is necessary for servicing the HVPS or components of the Feeder Assembly. As few

parts as possible are removed to separate the assemblies.

1. Perform the service preparation steps on page 8-3.

2. Open the Front Cover.

3. Remove the Top Cover (page 8-15).

4. Remove the Right Side Cover (page 8-17).

5. Remove the Left Side Cover (page 8-18).

6. Remove the Rear Tray Cover (page 8-19).

7. Remove the Rear Cover (page 8-20).

8. Raise the Transfer Belt and latch in the upright position.

9. Remove the Drive Clutch and Bearing Kit (page 8-48).

10. Remove the Fan (page 8-119).

11. Remove the IP Board Cage (page 8-140).

12. Remove the Transfer Belt (page 8-112).

13. Remove the screw (silver, 6mm) that secures the Front Cover ground harness

to the printer. Do not remove the wire from the guides.

Xerox Internal Use Only

Service Parts Disassembly

Workcentre 6505