Adf Media Path - Xerox Phaser 6500 Service Manual

ADF Media Path

Phaser 6500/WorkCentre 6505 Service Manual
The media set in the document tray is conveyed through the Feed Roller and
Takeaway Roller. The media image is scanned at the Constant Velocity Transport
(CVT) position, and the media is ejected through the Exit Roller.
Pinch Roller
Feed Sensor
Media Setting
When an original is set in the Document Tray and pushed into the tray until its
lead edge stops against the Document Stopper, an actuator moves to place the
ADF Document Sensor in the unshielded (unblocked) state, indicating media
detection.
Preparation for Feed
The media in the paper tray starts feeding when the Start button is pressed.
The Nudger Roller moves down and presses onto the media in the paper tray to
enable media feed. The Nudger Roller moves down with normal rotation of the
ADF Motor. Upon completion of media feed, the ADF Motor reverses rotation to
return the Nudger Roller to its normal position.
Feed Roller (Feed Roller Assembly)
Takeaway Roller
CVT Position
Xerox Internal Use Only
Theory of Operation
ADF Separator Pad
Nudger Roller
(Feed Roller Assembly)
Document Sensor
Exit Roller
s6500-082
2-67