MFP Control Panel
MFP PL1.2.3 (Console Assy Panel)
Phaser 6500/WorkCentre 6505 Service Manual
1. Turn Off power and disconnect the power cord from the wall outlet.
2. Open the Front Cover.
3. Remove the Duplex Unit if installed.
4. Release the two bosses on the Inner Front Cover using a small screwdriver.
5. Allow the Inner Front Cover to drop to release the five hooks, then remove the
cover.
Hooks
6. Disconnect P/J202, and remove the six screws (silver, tap, 8mm), that secure
the Control Panel to the Front Cover.
Xerox Internal Use Only
Service Parts Disassembly
Hook
s6500-474
s6500-475
P/J202
s6500-475
8-151