Sensors in the Media Path
Sensors in the Automatic Document Feeder
Phaser 6500/WorkCentre 6505 Service Manual
The following illustration identifies the sensors located along the paper path. Error
detection is based on media transport timing through the sensing area.
Interlock Switch
K Mode
Sensor
Registration
Sensor
Manual Feed
No Paper Sensor
Tray 2 Paper Path Sensor
This drawing shows the location of sensors in the Automatic Document Feeder on
the WorkCentre 6505.
Feed Sensor
Document Sensor
Xerox Internal Use Only
Tray No Paper Sensor
Tray 2 No Paper Sensor
ADF Motor
Cover Open Sensor
ADF Board
Theory of Operation
Exit Sensor
Right Side
Door Switch
s6500-034
s6500-081
2-19