Iot Start Image Marking Time-Out - Xerox Phaser 6500 Service Manual

IOT Start Image Marking Time-out

Phaser 6500/WorkCentre 6505 Service Manual
Applicable Error Code
• 024-362
Troubleshooting Reference Table
Applicable Parts
IP Board (ESS) (SFP PL8.1.7; MFP
■
PL8.1.2)
Troubleshooting Procedure
Step Actions and Questions
1 Check the firmware version
Is the firmware the latest version?
2 Check the error.
Does the error still occur when
printing?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 3 - SFP IP Board, LVPS, and Drive"
■
on page 10-8
"Map 8 - MFP LVPS, IP Board, and
■
Drive" on page 10-17
Yes
Go to step 2.
Replace the IP
Board. (SFP,
page 8-120;
MFP,
page 8-144)
No
Update the
firmware
("Firmware
Update" on
page A-16),
then go to step
2.
Complete.
3-63