Serial Number Format - Xerox Phaser 6500 Service Manual

Parts Lists

Serial Number Format

9-2
Changes to Xerox products are made to accommodate improved components as
they become available. It is important when ordering parts to include the following
information:
• Component's part number
• Product type or model number
• Serial Number of the printer
The serial number is found on a label located on the right-side frame near the
Fuser. To view the Serial Number you must open the Front Cover, lower the Transfer
Belt, and swing out the right end of the Fuser.
S/N: YXE030001
The nine-digit serial number uses the format PPPRSSSSS or MMMSSSSSSc.
PPP = Three digit alphanumeric product code
•
• MMM = Three digit numeric manufacturing location code
Product Code Mfg. Location Code
YXE —
YRB —
YTB —
YXG 316
YRX 316
• R = Single digit numeric revision digit, 0-3. To be rolled when the ending serial
number is reached or when a major product change occurs.
• SSSSS(S) = Five or six digit numeric serial number based on the following
table. The serial numbers are reset only when the ending number is reached or
when the revision number is rolled.
• c = Check digit (correct number from check digit algorithm)
Product
6500_N, 110V Engine
6505_N, 110V Engine
6505_DN, Duplex, 110V Engine 10001
6500V_N, 220V Engine
6505V_N, 220V Engine
Xerox Internal Use Only
http://www.manuals4you.com
MANUFACTURED: September, 2010
6500_N, 110V Engine
6505_N, 110V Engine
6505_DN, Duplex, 110V Engine
6500V_N, 220V Engine
6505V_N, 220V Engine
Starting Serial Number
10001
10001
000601
360101
Phaser 6500/WorkCentre 6505 Service Manual
s6500-386
Product
Ending Serial Number
99999
99999
99999
100500
460000