Iot Regi Off Jam - Xerox Phaser 6500 Service Manual

IOT Regi OFF Jam

Phaser 6500/WorkCentre 6505 Service Manual
Applicable Error Code
• 077-101
Troubleshooting Reference Table
Applicable Parts
Cassette Assy 250 (PL2.1.1)
■
Separator Holder Assy (PL2.1.5)
■
Drive Clutch and Regi Bearing Kit
■
(PL3.1.97)
Feeder Assy (PL3.1.98)
■
Feed Solenoid Kit (PL3.1.99)
■
Left Side Harness Assy (PL3.1.18)
■
Feed Roller Assy (PL3.2.4)
■
Regi Roller Actuator (PL3.2.8)
■
Registration Input Actuator
■
(PL3.2.11)
Registration Sensor (Sensor Photo)
■
(PL3.2.13)
Main Drive Assy (PL7.1.2)
■
Feed Drive Assembly (PL7.1.4)
■
MCU Board (SFP PL8.2.13; MFP
■
PL8.3.6)
Troubleshooting Procedure
Step Actions and Questions
1 Check the paper condition.
Is the paper in Tray 1 wrinkled or
damaged?
2 Does the error still occur when
printing?
3 Reload new paper in Tray 1.
Does the error still occur when
printing?
4 Check the Front Cover for latching.
Open and close the Front Cover, and
then latch correctly.
Does the error still occur when
printing?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 3 - SFP IP Board, LVPS, and Drive"
■
on page 10-8
"Map 4 - SFP MCU Board" on
■
page 10-9
"Map 8 - MFP LVPS, IP Board, and
■
Drive" on page 10-17
"Map 9 - MFP MCU Board and HVPS"
■
on page 10-18
"SFP Media Feed" on page 10-27
■
"SFP Main Drive" on page 10-28
■
"MFP Media Feed" on page 10-40
■
"MFP Main Drive" on page 10-41
■
Yes
Replace the
paper with a
new and dry
one, then go to
step 2.
Go to step 3.
Go to step 4.
Go to step 5.
No
Go to step 3.
Complete.
Complete.
Complete.
3-117