Control Panel - Xerox Phaser 6500 Service Manual

General Information

Control Panel

SFP Control Panel Button Descriptions
1-10
The Control Panel consists of multiple LEDs, a display, and several function
buttons. These buttons are used to navigate the menu system, perform functions,
and select modes of operation.
1
1. Display
2. Menu button
3. OK button
4. Wake Up / Power
Saver button
5. Cancel button
6. Navigation / Menu
select buttons
7. Return button
8. Status Indicator light
Xerox Internal Use Only
http://www.manuals4you.com
2 3
!
8 7 6
Displays status messages, menus, and toner
levels.
Scrolls to the menu option. Switches the display
between the menus and the print screen.
Selects the displayed menu option and also
prints reports and lists.
Stays lit in Power Save mode. Press to exit Power
Save mode and "wake up" the printer when in
sleep mode. When printer is idle, press to
manually put the printer in sleep mode.
Cancels the current print job.
Up / Down arrows scroll up and down through
the menu display.
Back / Forward arrows move left and right
through the menu display.
Back arrow backs out of a menu level. or
displays the Walk-Up Features menu.
Lights red to indicate an error condition or
warning that can be resolved by the user.
Blinks when an error occurs that cannot be
resolved by the user. Off when the printer is
operating properly.
Lights green when ready to receive data.
■
Blinks green when busy receiving data.
■
Lights red to indicate an error condition or
■
warning that can be resolved by the user.
Blinks when an error occurs that cannot be
■
resolved by the user.
Off when the printer is in Energy Saver mode.
■
Phaser 6500/WorkCentre 6505 Service Manual
4
5
s6500-006