Life Counter Values - Xerox Phaser 6500 Service Manual

Life Counter Values

Phaser 6500/WorkCentre 6505 Service Manual
Shifts the print area in
this direction by reducing
the value.
Slow Scan K to P
Slow Scan 600 M,Y,C
Shifts the print area in
this direction by reducing
the value.
Shifts the print area in
this direction by
increasing the value.
The life counter tracks the usage of several printer components. All but one of the
"Life" selections in the Parameter list read and display stored counter values for
those components. The one exception is the Life DTB Waste selection, which
allows you to either read or initialize the value. Use the Initialize selection to reset
the life counter for the Transfer Unit should it require replacement.
This table lists each counter and a value considered to be near end of life.
The life counter values reported when checking these parameters are not
expressed in units that can be compared to end-of-life values listed in the
product specifications. Use CWIS to find the life remaining for engine
components.
Xerox Internal Use Only
Adjustments and Calibrations
Shifts the print area in
this direction by
increasing the value.
Fast Scan K to M,Y,C
Fast Scan 2 K to M,Y,C
Fast Scan M-Feed, Tray
Image Side
Default Value
Default
Value
s6500-169
6-9