SFP Electrical
SFP Fan
SFP PL8.1.1 (Fan)
Phaser 6500/WorkCentre 6505 Service Manual
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the Top Cover (page 8-15).
4. Remove the Right Side Cover (page 8-17).
5. Remove the Left Side Cover (page 8-18).
6. Remove the Rear Tray Cover (page 8-19).
7. Remove the Rear Cover (page 8-20).
8. Disconnect P/J503 from the LVPS Board and release the Fan harness from the
guides on the fan duct.
9. Release 4 hooks that secure the Fan in the fan duct.
Replacement Note
Install the Fan to direct airflow into the printer. The Fan has arrows that
indicate the direction of airflow through the Fan.
Xerox Internal Use Only
Service Parts Disassembly
P/J503
s6500-303
8-119