Outer Pole Cover - Xerox Phaser 6500 Service Manual

Outer Pole Cover

MFP PL 1.1.1 (Cover Pole Outer)
Phaser 6500/WorkCentre 6505 Service Manual
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the Left Side Cover (page 8-18).
4. Remove the two screws (silver, 6mm, and silver, tap, 8mm) that secure the
Outer Pole Cover.
Hooks
6mm
5. Use a screwdriver to push the boss of the Top Cover (PL10.1.4) and release the
front of the Outer Pole Cover.
6. Release the 2 hooks that secure the Outer Pole Cover at the back to remove
the cover.
Replacement Note
Engage the 2 hooks on the back side of the Outer Pole Cover first.
Xerox Internal Use Only
Service Parts Disassembly
8mm 8mm
Boss
s6500-217
8-39